News

  • Packaging materials for tinplate cans in line with environmental protection demands

    Packaging materials for tinplate cans in line with environmental protection demands

    Based on the international environmental management standard ISO-14000, the tinplate with low pollution, recyclable and resource saving characteristics will have a broader development space in the future packaging applications: 1.Low pollution: In fact, tinplate, the main raw material in tin can...
    Read more
  • Hardness test of tinplate

    Hardness test of tinplate

    In the past, the hardness of tinplate was tested by using the table top Rockwell hardness tester, and the hardness of hr30t was measured by ordinary steel anvil. For many years, since the national standard GB / t2520-2000 on tinplate began to use the international general hr30tm hardness expressi...
    Read more
  • Ancient and modern ways of making metal cans

    Ancient and modern ways of making metal cans

    1.The traditional manufacturing method of metal can is as follows: firstly, the sheet metal blank is cut into a long square, then the blank is rolled into a cylinder (i.e., the cylinder body), and then the longitudinal joint line is soldered together to form a side seal. One end of the cylinder (...
    Read more
  • Drying process of ink

    In tinplate printing production, ink drying is a complex physical and chemical reaction process. It is necessary to control the drying speed of ink reasonably and grasp the physical and chemical mechanism of ink drying, so as to effectively carry out rapid printing operation and ensure product qu...
    Read more
  • Characteristics and advantages of tinplate material can making

    Characteristics and advantages of tinplate material can making

    Characteristics and advantages of tinplate cans: 1. Light impermeability 2. Good tightness 3. Reduction of tin 4. Provide a source of available iron 5. Recyclable and reusable. Meet the international environmental requirements, in line with the future product trends 6. Strong, protective, deforma...
    Read more
  • Current situation of metal can packaging in China’s food industry

    Current situation of metal can packaging in China’s food industry

    In recent years, China's food and beverage industry has made considerable progress. According to the statistics of the National Bureau of Statistics, from 2001 to 2013, the output of beverage industry and food canning industry in China achieved double growth. With good p...
    Read more
  • What kind of container should edible oil be put in?

    What kind of container should edible oil be put in?

    Edible oil, also known as "edible oil", refers to the animal or vegetable oils used in the preparation of food. "Oil" is a daily food, so whether it is preserved in a scientific way is of vital importance to human health. Edible vegetable oil has "four afraid" : one afra...
    Read more
  • Paint barrel manufacturer to explain the characteristics of paint barrel and points for attention in purchase and use

    Paint barrel manufacturer to explain the characteristics of paint barrel and points for attention in purchase and use

    Paint bucket factory production of all kinds of the bucket is widely used in packaging of various coating, paint, paint barrels adopt new polypropylene PP injection, good sealing, pressure resistance, acid and alkali resistant, anti-aging, easy to use, whether it is used in exterior coating, putt...
    Read more
  • Surface coating of paint packaging barrel and influencing factors of its strength

    Surface coating of paint packaging barrel and influencing factors of its strength

    Paint packing barrel refers to the container in which the paint is placed, and the surface is covered with a layer of antirust packing paint. Such a bucket will generally have the pressure to the container to withstand the requirements and rust requirements. Because paint belongs to a kind of coa...
    Read more
  • New structure and wall thickness analysis of mechanical oil cans

    New structure and wall thickness analysis of mechanical oil cans

    Regular oil changes are a routine part of car maintenance. Conventional oil changes are made by buying 4L cans of oil and having them replaced by a repair shop. The oil tank is a common container for storing oil, the current oil tank is only set on the side of the tank with a handle, carrying and...
    Read more
  • Special requirements for tinplate boxes

    Special requirements for tinplate boxes

    Special requirements are divided into the following points. Firstly, the ink must have good adhesion and mechanical properties. Since tinplate printing is eventually made into food cans, toy cans, metal frame cans, barrel cans and chemical cans that need to be cut, bent and stretched, the ink mus...
    Read more
  • Classification and characteristics of Tinplate Cans

    Classification and characteristics of Tinplate Cans

    Tinplate, commonly known as tin can,tin box, is made of tinplate. Tin is the surface of tin covered with tin. To play a protective role. Generally speaking, in order to package the exquisite, but uses the printing, commonly known as the printing tin can. Classification of cans: 1. According to th...
    Read more
1234 Next > >> Page 1 / 4